Plastic Shelving Unit That Goes Over The Back Of The Toilet

If you have a shelving unit that goes over the back of the toilet you can easily make cloth panels to cover each shelf and hide your personal hygiene products. 

Measure the length from the top to the bottom of each shelf and the width. Do the sides separately from the front of the shelving. You are going to want three panels for each shelf; one for each side and one for the front. Add one inch to each length and width for the seam. 

Select a durable cotton/polyester blend material that matches your decor. Also buy enough velcro to go around the entire length of each shelf. If you have two shelves at 60" total each then you will need 120" of velcro. Get the velcro with the sticky backing. 

Cut out each of your panels and hem all four sides. Place one side of the velcro along the top edge of the shelving going from one side to the other. Use the other side of the velcro on the top of each panel. You may need to sew it in place to reinforce it. Once the velcro is attached it should hook on the shelf and cover up your belongings. Do this for all three panels on each shelf. To use simply lift of remove the panels if you need anything off your shelf.